The Pelton turbine is widely used in hydropower station with the
heads from 80-1000m.
Pelton turbine is consisted of runner, turbine case, nozzles
assembly, inlet pipe, deflector etc. The runner is assembled in the
shaft of the generator, torque transmission by ping.
lt utilizes the dynamic power of high pressure water flow to rotate
the runner and force the rotor work, The centre line of the jet is
in the same plane as the runner while rotating.
Pelton turbine has the advantages of compact construction, stable
running and easy operation. Normally, Small pelton turbine always
arranged with horizontal shaft and one or two nozzles, Medium size
and larger Pelton turbines are most often arranged with vertical
shaft, and equip four or six nozzles to obtain more power.
1. Water head: 80m -- 1000m
2. Power: 0.5MW --- 50MW
3. Frequency: 50hz / 60hz
4. Generator Output voltage: 400V, 3.3KV, 6.3KV, or 10.5KV AC three
If you are interested in the Pelton turbine, you should send some
key parameters (such as net head, flow discharge, unit number,
frequency, voltage) in inquiry.
We can supply pelton turbine generator above 4000KW, supply the
runner with Forge and CNC machine, or runner with cast abrading
machine for your require.
Horizontal pelton turbine with one /two nozzles
Vertical pelton turbine with four nozzles
|Water head||80m -- 1000m.|
|Installation capacity||100KW -- 50MW|
|R unner material|
Stainless steel (0Cr13Ni4Mo)
Cast machine/Forge + CNC machine
|Generator type||AC Synchronous generator|
|Auxiliary Equipment||Governor, Inlet Valve, unit side panel, excitation system|
TC Company is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
TC Company covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
TC Company Pelton runner with Forged integrally + Entire CNC
machning has already achieved the ace level in the world since the
accumulation of the high head runner experience in decades.
the pelton runner adopt integrally forged ( ASTM A 473 S41500
material), guarantee the reliability of the material, then machine
shaping by CNC, improve the pelton buckets precision, and shap
wave, thus ensure the turbine hydraulic performance and safty
our factory have advanced test system, all parts have ultrasonic
testing, penetration testing, magnetic testing, radiographic
testing, dimension&profile checking by measuring arm, to
guarantee our turbine best quality.